Skip to main content

White LEDs offer radio-free wireless option

White LEDs offer radio-free wireless option

A photonic alternative to WLAN has been shown to exceed 100 Mbit/s and could provide bandwidth in a currently unlicensed area of the spectrum, if it can conform to general illumination standards.

Walewski's 101 Mb/s setup

Thanks to white LEDs, overhead lighting could soon be used to transmit data over a RF-free wireless connection.

That's according to Joachim Walewski from Siemens Corporate Technology, who has modulated the light emission from white LEDs in order to make a 101 Mbit/s wireless link with a PiN diode photodetector.

“With this, you can have interference-free communication,” Walewski pointed out, adding that the visible spectrum is currently free of any requirements for communication licenses.

Siemens is currently exploring the technology in order to keep pace with a competing Japanese collaboration that expects to bring similar technology to market by 2011, Walewski says.

His Munich-based team claims to be the first to have boosted data transmission rates by focusing on specifically detecting blue light. Removing noise arising in the yellow part of the spectrum, from light emitted by the LED's phosphor, provides an order-of-magnitude increase in data transmission rates.

The results were presented by Walewski's collaborators at the Technical University of Eindhoven's COBRA Institute when the European Conference and Exhibition on Optical Communication hit the German capital in September.

The team, which also included a contingent from the Berlin-based Heinrich-Hertz Institute, presented the work as an intermediary early stage between exploratory and full development research. So early stage, in fact, that it uses LEDs bought from the local electronics shop, instead of from Siemens' subsidiary Osram.

“The next step is of course using large area assembled chip arrays like the Ostar,” Walewski confirmed.

In the change from radio to visible frequencies many protocols that allow multiple messages to be sent remain unaltered, like time-division multiplexing. However, some of the familiar properties of light provide an important differentiator, such as signals being blocked by physical barriers like walls.

“You can have spatial multiplexing because, if you look at the ceiling in your office, the lamp in the right corner doesn't really interfere with the lamp in the left corner,” Walewski explained.

Overhead light-based data transmission technology already exists, for example as provided by a firm called Talking Lights, who make systems that transmit GPS-like data indoors, where it's otherwise not provided.

However, Walewski points out that for the technology to really become widely adopted, it's important to keep lighting standards as a primary consideration, alongside data transmission capability.

“I haven't really seen anything out there that really is totally compliant with an existing lighting system,” he said. “Everything I’ve seen so far is home built demonstrators that were specially designed to fulfill the task of communications.”

“We can't just tell lighting manufacturers what to do with their lighting. We have to adapt to them.”

This article is written by K. Balachander. He works for Philips lighting as a Planning & Development Manager.

Comments

Post a Comment

Popular posts from this blog

Sharp enters the non-polar GaN fray

The leading diode laser and consumer electronics manufacturer is hoping to push GaN lasers to longer wavelengths for color display applications. The field of non-polar GaN lasers, currently dominated by Rohm Corporation and the University of California, Santa Barbara, now has another big player in the shape of Sharp Corporation. This firm's researchers, like the other groups, have turned to this material to avoid built-in polarization fields found in conventional c -plane GaN. These fields reduce laser output efficiency and shorten emission wavelengths, in a blue-shift effect that worsens at higher injection currents. Sharp's 400nm blue laser Non-polar m -plane GaN doesn't have these fields, so substrates made of this material are promising candidates for fabricating blue lasers with longer wavelengths, nearer the green part of the spectrum (see related stories). Therefore, rather than the 400 nm laser diodes it makes using c -plane GaN for its Blu-ray pla...
Post a Comment
Read more

Toshiba claims GaN microwave power record

Toshiba claims GaN microwave power record The Japanese conglomerate turns up the power for high-definition satellite broadcasting with its Ku-band GaN-on-SiC HEMT. Toshiba has produced a GaN HEMT with an output power of 65.4 W at 14.5 GHz, that it hopes will replace competing electron-tube technologies in satellite applications. According to the Japanese company, this is the highest power-output FET to operate in the Ku-band, the region of the microwave spectrum between 12 and 18 GHz. Toshiba pushes Ku-Band amps Presented at European Microwave Week on October 8, the device will be sampled at the end of 2007 and should enter mass production in March 2008. The GaN HEMTs are marketed for high-capacity, high-definition satellite broadcasting base stations and high-power radar systems, which both require high-power amplifiers. “Demand is particularly strong for GaN devices, which offer advantages over GaAs devices in heat dissipation and high power performance characteristi...
Post a Comment
Read more